Search

You can find the results of your search below.

Fulltext results:

Supercharging the Exocet
8 Hits, Last modified:
n it. It doesn’t take very much and you can get a kit on ebay for £13 which includes a syringe (which h... tune.co.uk/product/mx-5-89-05-550cc-ev14-injector-kit/) - £250 {{ :picture19.jpg?450 |}} __**Int... k1 1.6 MX5 for £30 and a universal throttle cable kit for £20. I had to modify the stock TB by removing... 0|}} {{:IMG_0866.jpeg?400|}} __**Mounting Kit, pulleys & belt - £280**__ There are a few M45 m
Brake / Clutch / Fuel Lines
4 Hits, Last modified:
1e2d88c568.jpeg?400 |}} ===Brake Lines=== In the kit from MEV you will receive copper brake lines. How... V (Freakyparts) also sell a full HEL braided line kit specifically for the Exocet (see parts used below... | Datasheet}} Freakyparts HEL Braided brake hose kit https://freakyparts.co.uk/products/hel-braided-brake-hose-kit
NC Mating the Chassis
3 Hits, Last modified:
===== NC Mating the Chassis ===== ===Getting the kit home=== A long wheel base van is recommended {{:g... ailer {{:guide:00000874-photo-2023-01-26-12-01-25_kit_collected_trailer.jpg?400|}} ===Mounting the fra... |}} === What additional bolts do I need === The kit supplies bolts to attach the chassis to the sub f
IVA Guide
2 Hits, Last modified:
ations to register your vehicle should be sent to KIT AND REBUILDS TEAM; DVSA; Swansea; SA99 1ZZ. Doc... t was completed. You will need a receipt from the kit supplier that states "new and unused" and the VIN
Mating the chassis
2 Hits, Last modified:
e the engine from the sub-frame to construct your kit). Below you can see the four bolts used to hold ... onal brace (not essential and not included in the kit) above the master cylinder to stiffen the chassis
MK3 Build Section
2 Hits, Last modified:
cet Mk3 build diary]] Not included in the Exocet kit and not available from MEV: - Bonnet catches ... existing maybe) - Anything electrical (lighting kit is available though, but headlights questionable
Stripping the donor
2 Hits, Last modified:
e, not by cutting pipes! Always have a first aid kit at hand and be in reach of a phone if working alo... n be seen below. You can stop here and build the kit although most strip the skate down, replace the b
Suspension
2 Hits, Last modified:
can spring to 32mm when welded. The spacers on my kit are 32mm when I use a small & big spacer. So it works ok on one corner on my kit but not the other three. MEV are supplying smalle
Recommended Tools
2 Hits, Last modified:
n of your donor car and while building the Exocet kit car. **Required:** *Metric sockets, 6 point ... gun etc (if stripping wiring loom) *Tap and Die kit (cleaning threads mostly) (NC M14x1.5mm M12x1.25m
Wheels
2 Hits, Last modified:
s good. Nor will the wing stays fit. The current kit comes supplied with wider wings then the original kit, it's possible to now fit up to a 235mm tyre inst
Build Overview
1 Hits, Last modified:
e launch of Exocet in 2010 created a storm in the kit car industry. Heralded as the new Lotus 7 with it
images
1 Hits, Last modified:
build guide, original copy [[https://mevltd.co.uk/kit-cars/mev-exocet|here]] The following people's bu
Members Map
1 Hits, Last modified:
Shipley,,Billingham; Mk2.5 Exo address,GL19 3QS,Mev Kit Cars,,Offical Exocet Manufactuer </googlemaps3>
Body Work and Mirrors
1 Hits, Last modified:
Fitting the bonnet=== Here is a video from a mk1 kit the principles are the same [[https://www.youtube
Radiator
1 Hits, Last modified:
he builder for this purpose or purchased with the kit for the MK1 radiator. {| style="margin: auto;" |
Stripping the donor
1 Hits, Last modified:
Suppliers
1 Hits, Last modified:
Suspension
1 Hits, Last modified: