Fulltext results:
- Lighting & Instruments
- a minimum of 350mm from the ground. The fog light needs to be on the offside or centre line, and the reve... attention to the IVA requirements, the fog light needs to be on the offside, and the reverse light on th... has to be a minimum of 250mm from the ground. Fog needs to be a minimum of 100mm from the stop/tail light
- Formatting Syntax @wiki
- glish language file * Copy only the strings that needs to be modified */ $lang['js']['nosmblinks'] = ''... be shown before the video has started. That image needs to have the same filename as the video and be eit... can be done to produce any kind of HTML, it just needs to be added to the [[doku>entities|pattern file]]
- Fuel Tank
- se make sure it is leak free. The original neck needs to be cut to make the middle metal pipe as shown,... for the bolts to help stop the GRP stressing. It needs to be cut off and then filled in the centre to al
- Pedals & Steering
- ave a plug for the brake level warning. *A hole needs drilling then filing square for the throttle cabl... mn in the bolt in the clutch pedal for the column needs replacing with a longer one and a stack of washer
- Supercharging the Exocet
- ket / tab** on the outlet side of the body – this needs to come off to give you room to fit a custom outl... **Injectors - £250**__ More air means the engine needs more fuel, the stock MX5 fuel pump is more than a
- Wheels
- Recommend Wheels=== *XXR 15 527 15x8.25 ET0 - Needs a 215mm wide minimum tyre *XXR 16 527 16x8.25 ET0 - Needs a 215mm wide minimum tyre
- Brake / Clutch / Fuel Lines
- ly the handbrake. ===Fuel Lines=== The fuel hose needs to have the necessary certifications in order to
- Floors & Sides
- al distance between mounting points although just needs to be "secure".// {| style="margin: auto;" |- |
- Handbrake
- ====== Handbrake ====== The handbrake needs careful positioning to ensure cable tension before drilling
- Mating the chassis
- anti roll bar is left in place but the front one needs bolting to the chassis with 4 8mm bolts. In addi
- Fitting the fuel tank
- fueltank.jpeg?400|}} Ideally the one on the left needs to vent for filling. We have put a rollover valve
- Stripping the donor
- emoving them. If the donor has air con then this needs the pressure releasing under control at the valve
- Stripping the donor
- emoving them. If the donor has air con then this needs the pressure releasing under control at the valve
- Wiring
- ingtray.jpg?300 }} ===Fog light=== The fog light needs to be only lit when the dipped beam, main beam or
- Welcome to your new DokuWiki @wiki
- s ===== Create your first pages ===== Your wiki needs to have a start page. As long as it doesn't exist