Fulltext results:
- IVA Guide
- or centre and it is 90 degrees to the road. Make sure there is a specified fluid label on or near the b... bout complying with screen requirements. * Make sure you have a dash mounted mirror, permanently fixed... there. Before doing so you need to be absolutely sure that it is not going to overheat due to air locks
- Fuel Tank
- . If you are going to use this method please make sure it is leak free. The original neck needs to be ... r the tank, this can be bolted to the frame. Make sure that it leans away from the exhaust so that any f
- Stripping the donor
- eed to do is plug it all back where it was. MAKE SURE YOU LABEL EVERYTHING. Labels on both ends of plug... embling the front top suspension arm, please make sure to install the bolt from the rear to the front, s
- Suspension
- embling the front top suspension arm, please make sure to install the bolt from the rear to the front, s... are many different sizes of Anti Roll bars, make sure you have the correct one in your kit. ===Anti Ro
- Wiring
- not needed. {{ wiki:Image--038.jpg?300 }} Make sure that all connections are clean and tight and that... ple splices in the loom from the factory, so make sure you trace the wires full length before making any
- Bodywork & Mirrors
- 9-eff063ba93b3.png?400 |}} Before you start make sure the bonnet is all aligned and hinged with mounted
- Brake / Clutch / Fuel Lines
- d more common in fuel so it's a good idea to make sure it's compatible. You have an option to run copper
- Engine
- caution before starting to strip an engine: make sure to look at parts prices. Some things (plugs, oil
- Lighting & Instruments
- to the labels you attached to the loom, and make sure you have a good earth on all the points above. Ob
- Stripping the donor
- hammer. I had a mechanic remove them so I am not sure which of us damaged them. I believe there are too
- Suspension
- overs uses two spacers for the top mounting, make sure you use a big and small spacer on each corner.
- Wiring
- g.jpg?400|}} ===Traction Control Module=== Make sure this is pointing in the correct direction, place
- Rust Removal and Preparation
- easier to buy new bolts off the shelf, just make sure you get the correct grade as you need a minimum f
- DokuWiki @wiki
- er [[doku>donate|donating]] a few bucks ;-). Not sure what this means? See the [[doku>faq:license|FAQ o
- Formatting Syntax @wiki
- the next cell completely empty as shown above. Be sure to have always the same amount of cell separators