Fulltext results:
- IVA Guide
- of the side panel could be called into question, take a file to your IVA test. The edges of the pedal a... to allow you time to modify any fail points. * Take tools, rubber trim, rubber hose, P clips, cable t... e engine number and V5 are from a pre Aug 92 car. Take the receipt for any fuel pipe used to prove it is... ace for tools and any other items you may wish to take in case minor alterations are required. A mate wi
- Build Overview
- rts cars and made them better and cheaper, now we take what they created and make it even better and cos... bonnet, rear cover, front and rear wide wings (to take up to 235mm tyre). *Sport chassis: *As Roa
- MEV Exocet Build Guide
- . </WRAP> <WRAP centeralign>** Enjoy your build. Take your time and take care. OK LET’S GET STARTED**</WRAP> <div class="exocet-menu"> ^ ^ ^ | {{:046-air
- Supercharging the Exocet
- obably still the original stuff in it. It doesn’t take very much and you can get a kit on ebay for £13 w... number of ribs in the micro-V, the SC pulley can take 6 but the standard aux-pulley is only 4. You can
- Wiring
- tors rather than simply cutting them. You need to take care as often the wires will have multiple splice... heated seats, power windows etc) and others will take more studying before removal, this generally goes
- Brake / Clutch / Fuel Lines
- he reason to swap this over. If you like, you can take the complete non-ABS setup including the master c
- Floors & Sides
- You will need to mark the holes at 100mm centres. Take extra care when marking the holes along the cross
- Fitting the fuel tank
- ====== Fitting the fuel tank ====== The fuel take is bolted onto these brackets, putting the front of t
- Turning off airbag light
- ured out how to switch off the airbag light. Just take the orange wire from the instruments to ground. N
- Stripping the donor
- tripping the donor====== We assume that you will take all precautions and use proper personal protectiv
- Wiring
- module but I believe that can be removed anyway. Take your time and work through it. Start with removin
- Rust Removal and Preparation
- e you can use a brass wheel on a drill, this will take a long time and won't remove 100% of the rust in
- Stripping the donor
- ripping the donor ====== We assume that you will take all precautions and use proper personal protectiv
- Suspension
- d or the bolt cut.** ===Bushes=== Many builders take this opportunity to change out the original Mazda
- Formatting Syntax @wiki
- ion for deeper levels - That's it </code> Also take a look at the [[doku>faq:lists|FAQ on list items]