MK1 / MK2 / MK2.5 Build Section

	**Stripping the donor**	Start stripping that rusty MX-5 donor.
	**Floors & Sides**	Method of installing the floor and chassis side panels.
	**Brake, Clutch & Fuel Lines**	Routing of the main lines on the chassis.
	**Mating the chassis**	Lowering of the chassis over the skate.
	**Pedals & Steering**	Mounting the pedal box and steering rack.
	**Radiator**	Mounting the radiator.
	**Fuel Tank**	Mount the fuel tank.
	**Handbrake**	Handbrake lever and cable routing.
	**Wiring**	Stripping the loom and installing the wiring harness.
	**Seats & Harnesses**	Seats that can be used along with fitting instructions.
	**Bodywork & Mirrors**	Mounting the GRP panels and mirrors.
	**Lighting & Instruments**	Headlamp and dash cluster installation.
	**Wing Stays**	Wing stays and GRP wings installation.
	**Suspension**	All aspects of the suspension.
	**Engine**	If you don't know what this is, go back to the start of the guide.
	**Wheels**	ET explained and what wheels you need for the Exocet.
	**Supercharger**	Practical guide to supercharging the Exocet.