Search
You can find the results of your search below.
Fulltext results:
- Stripping the donor
- (WD40). === Removing the body === The aim is to remove the body shell and leave the front sub-frame with... e.jpg?300}} |} === Let's get started ==== First remove battery from the boot then push the cables down t... id axle stands for access to the underside. Next, remove the seats, seat belts, and carpets. Remove the speedometer plugs and cable and then remove the instrumen
- Stripping the donor
- doku.php/serviceman]] , in it you can find how to remove almost any part of the MX-5 mk3 as well as most o... u're putting it back together. If when trying to remove the dashboard it seems unwilling to budge you may... 400 |}} === Removing the body === The aim is to remove the body shell and leave the front sub-frame with... rts.jpg?300}} | {{finishedskate.jpg?300}} |} === Remove Engine from Sub Frame === Remove the bolts on th
- Rust Removal and Preparation
- quite a soft metal and as such it is very easy to remove a lot of material very quickly. Brass wire wheels... on a drill, this will take a long time and won't remove 100% of the rust in all cases so something more a... also want to consider using acid. You can simply remove any thick / flaky rust from a part and then give ... ng and powder coating. This if done correctly can remove near to 100% of rust from a part and because the
- Brake / Clutch / Fuel Lines
- s come with ABS and it's a personal choice if you remove or keep it, most people remove it. You do not need to keep ABS to pass the IVA test even if the donor was fitted with it. If you wish to remove the ABS system then you can remove all wiring along with the pump. You can then also modify the brake lin
- Wiring
- get everything running you can then check as you remove unwanted wires. Watch for the feed for the dash b... 23-07-19-22-39-46_anti_lock_sensor.jpg?400|}} ===Remove wires from Fusebox=== Actually removing complet... guide:00001786-photo-2023-04-16-14-01-12_fuse_box_remove_wire.jpg?400|}} The fusebox before {{:guide:fus... lowing fuses can be removed {{:guide:00001812-photo-2023-04-17-18-48-19_fuses_to_remove.jpg?400|}}
- Engine
- ngine====== ===Removing the flywheel=== How to remove the flywheel spigot bearing without a special tool {{ :guide:00004945-video-2023-09-20-19-12-57_remove_flywheel.mp4 |}} Other found the above tricky an... ined the transmission fluid but you don't need to remove the gear stick and therefore probably don't need
- Wiring
- ring diagrams to find out what cables you need to remove. It is best to de-pin these completely from the c... engine bay sub-harness as there is very little to remove here. The majority of wiring to remove is in the middle "dash" harness, and the rear harness. You can s
- Suspension
- When necessary some builders choose to completely remove the bridge, others trim it back, here is an examp... r you may need to notch the metal collar along or remove it completely to solve the problem shown below. P
- Wing Stays
- You can drill with the suspension assembled. Just remove the shock absorber and use an electric drill from... is forged so fairly easy to drill. Alternatively remove the top wishbone bolt to allow access by pivoting
- Build Overview
- are required plus the loan of an engine hoist to remove the MX5 body. -No nightmare electrics to face a
- Engine
- ave a nasty habit of shearing off when you try to remove them which will be a whole world of unnecessary p
- Fuel Tank
- red, if it is lockable it must not be possible to remove the key from the filler cap until it is locked ba
- Lighting & Instruments
- rds and leave the other wires with no connection. Remove headlamp motor fuses. For a Mk2/NB donor the abov
- Mating the chassis
- emoved in this example but it is not necessary to remove the engine from the sub-frame to construct your k
- Brake Clutch Fuel Lines
- you do it after you know you can get to them and remove them. {{::runningbrakefuellines.jpeg?400|}} {{:
