All of the bushes went is easily with the supplied grease using a vice expect https://ncmiata-servicemanual.com/src/g5w02/html/id021300800600.html the one in F as it kept twisting when pushed in when using a vice and press. I then found this link https://www.powerflex.co.uk/fitting-guides which showed it is supposed to twist. I pushed it in with a vice as far as it goes then managed to get a couple of bit of metal between the arm and the vice to push it in the last

Each of the coilovers uses two spacers for the top mounting, make sure you use a big and small spacer on each corner. The lugs should be 31mm but can spring to 32mm when welded. The spacers on my kit are 32mm when I use a small & big spacer. So it works ok on one corner on my kit but not the other three. MEV are supplying smaller spacer to address this issue.

{| style=“margin: auto;”